FERROWRIGHTSend RFQQUOTE IN 1 DAY

FERROWRIGHT FABRICATION / HAUPPAUGE, NY

  1. 01Home
  2. 02Capabilities
  3. 03Parts catalogYOU ARE HERE
  4. 04Industries
  5. 05Quality
  6. 06The shop
  7. 07Equipment
  8. 08Design guide
  9. 09Case studies
  10. 10Bracket configurator
  11. 11Request a quote
  12. 12Careers
  13. 13Questions buyers ask
  14. 14Contact and visit
  15. 15Customer login

QUOTE DESK / 631 555 0148 / MON TO FRI 07:00 TO 18:00 ET
180 KERF COURT / HAUPPAUGE, NY 11788

03.13FW-5520 / REV C / MACHINED / 1 PROCESS

Standoff set, M3 × 12 (8 pcs)

A set of eight male-female M3 standoffs, 12 mm long, turned from 5.5 mm stainless hex bar.

FW-5520 set of eight stainless M3 standoffs standing upright on the bench in two staggered rows
  1. M3 × 12 MM, MALE-FEMALE
  2. 5.5 MM HEX / SET OF 8

DRAWING REQUIREMENTS

FW-5520, as drawn.

12 MM5.5 AFFW / DIMENSIONS IN MMSCALE NTS / THIRD ANGLEM3 × 12 MM / 5.5 MM AF / MALE-FEMALE / SET OF 8
FW-5520 / REV C / THIRD ANGLE
OverallM3 × 12 MM / 5.5 MM AF
Stock5.5 MM HEX BAR
Tolerance±0.13 MM LENGTH / M3 THREADS, GO AND NO-GO
Materials303 bar
FinishesPassivate
PackagingSets of eight in a labeled bag.
DrawingFW-5520 REV C / 1 SHEET

NOTES FROM THE FLOOR

Before FW-5520 runs.

  1. 01

    Threads are checked with go and no-go gauges, one set per lot.

  2. 02

    Sold in eights to match a common board layout.

  3. 03

    Passivated, so they will not stain the board.

Made on, used in.

Specify alongside FW-5520.

1.501.501.50FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLEFLANGES 1.50 / 1.50 / OFFSET 1.00 / 1.50 WIDE / 0.090 SHEET

FW-1046 / REV C / FORMED / PHOTOGRAPHED

Z-bracket, 1.00 in offset

3.00 × 1.00 × 1.50 IN / 2 MATERIALS

FROM $7.38 AT 250 / 10 DAYS
6.003.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLELEG A 6.00 / LEG B 6.00 / 3.00 WIDE / 3.00 GUSSET / 0.188 PLATE

FW-1050 / REV C / WELDED / PHOTOGRAPHED

Gusseted angle bracket

6.00 × 6.00 × 3.00 IN / 2 MATERIALS

FROM $16.99 AT 250 / 12 DAYS
12.008.004.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 × 8.00 × 4.00 IN / 0.063 SHEET / CUTOUT 3.500 × 1.250

FW-2210 / REV C / FORMED / PHOTOGRAPHED

Chassis enclosure

12.00 × 8.00 × 4.00 IN / 2 MATERIALS

FROM $66.56 AT 250 / 11 DAYS
19.0014.003.47FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE17.00 × 3.47 × 14.00 IN (2U) / 19 IN EARS / 0.063 SHEET

FW-2216 / REV C / FORMED / PHOTOGRAPHED

Rack chassis, 2U

17.00 × 3.47 × 14.00 IN / 2 MATERIALS

FROM $89.93 AT 250 / 12 DAYS

QUOTE DESK / MON TO FRI 07:00 TO 18:00 ET

Need FW-5520 changed? Send the revision.

A different hole, flange, thickness or finish is a drawing change, not a new part. Mark what moved and the estimator prices the difference.

Quote a variationCall the quote desk, 631 555 0148

DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY

Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Main pages
Details
Try it
Behind the counter
Small print
Back to Sumo Studios

[] previous / next demo