316 hardware for boats on both shores.
Brackets, plates, collars and flanges in 316 for boatbuilders and yards from the North Shore to the South Shore, electropolished when the part lives in spray.
Material cert, per lotEvery orderEvery orderEvery orderEvery order
Certificate of conformanceEvery orderEvery orderEvery orderEvery order
First article reportOn requestEvery new part and every new revisionNew parts, on requestNew panel layouts
Dimensional reportOn requestWhen the PO asksEvery lot of welded shelvesOn request
Finish certEvery electropolish batchEvery partner finishEvery passivate and electropolish batchEvery anodize batch
Coating recordOn requestOn requestOn requestEvery powder batch
Weld recordOn requestOn requestOn requestOn request
Packing listEvery shipmentEvery shipmentEvery shipmentEvery shipment
- 2 to 100
- ±0.010 in
- 6 to 12 days
- Electropolish, passivate
What we make for marine buyers.
On the rack, by grade.
The full stock table| Material | Thickness | Finishes |
|---|---|---|
| 316 stainless | 0.063 to 0.500 in, sheet on order above 0.125 | Electropolish, passivate |
| 304 stainless | 0.040 to 0.250 in | Passivate, for parts above the spray line |
| 5052-H32 aluminum | 0.090 to 0.250 in | Anodize |
| A36 steel | 0.125 to 0.750 in | Hot-dip galvanize through a partner |
From 304 to 316 after one season.
The brackets were 304. After one season on boats moored on the South Shore they showed brown tea-staining at the welds and the bend lines.
- 316
- +18%
- 0
So you don't have to ask.
- We do not do structural hull work.
- We do not make rigging or rated lifting gear.
- We do not install on the boat; we ship to the yard.
Bring the marine requirements forward.
Mark the critical dimensions and the documents your receiving inspection needs before the job is priced. They stay with the traveler.
DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY
Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Details
Behind the counter