FERROWRIGHTSend RFQQUOTE IN 1 DAY

FERROWRIGHT FABRICATION / HAUPPAUGE, NY

  1. 01Home
  2. 02Capabilities
  3. 03Parts catalogYOU ARE HERE
  4. 04Industries
  5. 05Quality
  6. 06The shop
  7. 07Equipment
  8. 08Design guide
  9. 09Case studies
  10. 10Bracket configurator
  11. 11Request a quote
  12. 12Careers
  13. 13Questions buyers ask
  14. 14Contact and visit
  15. 15Customer login

QUOTE DESK / 631 555 0148 / MON TO FRI 07:00 TO 18:00 ET
180 KERF COURT / HAUPPAUGE, NY 11788

03.3FW-1050 / REV C / WELDED / 3 PROCESSES

Gusseted angle bracket

A heavy angle bracket with a welded triangular gusset, for loads that would open up a plain L. 6.00 in legs, 3.00 in wide, in 0.188 plate.

FW-1050 gusseted angle bracket in mill-finish A36 steel, the triangular gusset TIG welded into the inside corner
  1. GUSSET 3.00, TIG BOTH SIDES
  2. 90° ±0.5° AFTER WELDING
  3. A36 / T 0.188 / MILL

DRAWING REQUIREMENTS

FW-1050, as drawn.

6.003.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLELEG A 6.00 / LEG B 6.00 / 3.00 WIDE / 3.00 GUSSET / 0.188 PLATE
FW-1050 / REV C / THIRD ANGLE
Overall6.00 × 6.00 × 3.00 IN
Stock0.188 IN
Tolerance±0.010 IN CUT / ±0.5° LEG ANGLE AFTER WELDING
MaterialsA36 HRPO / 304 2B
FinishesMill / Black Powder / Zinc / Passivate
PackagingBoxed in fives with cardboard between parts; lot label on each box.
DrawingFW-1050 REV C / 1 SHEET

NOTES FROM THE FLOOR

Before FW-1050 runs.

  1. 01

    The gusset is cut from the same sheet and TIG welded on both sides.

  2. 02

    We check the leg angle after welding and correct weld pull on the fixture, not with a hammer.

  3. 03

    Powder and zinc are for A36; 304 ships passivated.

Made on, used in.

Specify alongside FW-1050.

12.008.004.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 × 8.00 × 4.00 IN / 0.063 SHEET / CUTOUT 3.500 × 1.250

FW-2210 / REV C / FORMED / PHOTOGRAPHED

Chassis enclosure

12.00 × 8.00 × 4.00 IN / 2 MATERIALS

FROM $66.56 AT 250 / 11 DAYS
19.0014.003.47FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE17.00 × 3.47 × 14.00 IN (2U) / 19 IN EARS / 0.063 SHEET

FW-2216 / REV C / FORMED / PHOTOGRAPHED

Rack chassis, 2U

17.00 × 3.47 × 14.00 IN / 2 MATERIALS

FROM $89.93 AT 250 / 12 DAYS
12.0016.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 W × 16.00 H × 6.00 D IN / 0.075 WALL / HINGED DOOR

FW-2230 / REV C / WELDED / PHOTOGRAPHED

Wall-mount enclosure, hinged door

16.00 H × 12.00 W × 6.00 D IN / 2 MATERIALS

FROM $128.15 AT 250 / 15 DAYS
19.006.97FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE19.00 × 6.97 IN / 0.125 SHEET / 8 × Ø0.281 RACK HOLES

FW-3301 / REV C / CUT / PHOTOGRAPHED

Rack front panel, 4U

19.00 × 6.97 IN / 1 MATERIAL

FROM $35.62 AT 250 / 13 DAYS

QUOTE DESK / MON TO FRI 07:00 TO 18:00 ET

Need FW-1050 changed? Send the revision.

A different hole, flange, thickness or finish is a drawing change, not a new part. Mark what moved and the estimator prices the difference.

Quote a variationCall the quote desk, 631 555 0148

DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY

Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Main pages
Details
Try it
Behind the counter
Small print
Back to Sumo Studios

[] previous / next demo