FERROWRIGHTSend RFQQUOTE IN 1 DAY

FERROWRIGHT FABRICATION / HAUPPAUGE, NY

  1. 01Home
  2. 02Capabilities
  3. 03Parts catalogYOU ARE HERE
  4. 04Industries
  5. 05Quality
  6. 06The shop
  7. 07Equipment
  8. 08Design guide
  9. 09Case studies
  10. 10Bracket configurator
  11. 11Request a quote
  12. 12Careers
  13. 13Questions buyers ask
  14. 14Contact and visit
  15. 15Customer login

QUOTE DESK / 631 555 0148 / MON TO FRI 07:00 TO 18:00 ET
180 KERF COURT / HAUPPAUGE, NY 11788

03.2FW-1046 / REV C / FORMED / 2 PROCESSES

Z-bracket, 1.00 in offset

A Z-shaped bracket that steps a component 1.00 in off its mounting face. Two 1.50 in flanges, 1.50 in wide, in 0.090 aluminum or 316 stainless.

FW-1046 Z-bracket in clear anodized aluminum on the bench, its two flanges stepped 1.00 in apart
  1. R 0.090 TYP, 2 BENDS
  2. OFFSET 1.00 ±0.015
  3. 5052-H32 / CLEAR ANODIZE

DRAWING REQUIREMENTS

FW-1046, as drawn.

1.501.501.50FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLEFLANGES 1.50 / 1.50 / OFFSET 1.00 / 1.50 WIDE / 0.090 SHEET
FW-1046 / REV C / THIRD ANGLE
Overall3.00 × 1.00 × 1.50 IN
Stock0.090 IN
Tolerance±0.010 IN CUT / ±0.015 IN FLANGE TO FLANGE
Materials5052-H32 / 316L 2B
FinishesMill / Clear Anodize / Passivate
PackagingBagged in tens by finish; revision and lot on each label.
DrawingFW-1046 REV C / 1 SHEET

NOTES FROM THE FLOOR

Before FW-1046 runs.

  1. 01

    The offset is formed in two hits and held to ±0.015 in, flange to flange.

  2. 02

    In 316 we passivate after forming so the bend lines do not stain on a boat.

  3. 03

    Anodize is clear; mark any bare ground contact on the print and we mask it.

Made on, used in.

Specify alongside FW-1046.

6.003.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLELEG A 6.00 / LEG B 6.00 / 3.00 WIDE / 3.00 GUSSET / 0.188 PLATE

FW-1050 / REV C / WELDED / PHOTOGRAPHED

Gusseted angle bracket

6.00 × 6.00 × 3.00 IN / 2 MATERIALS

FROM $16.99 AT 250 / 12 DAYS
12.008.004.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 × 8.00 × 4.00 IN / 0.063 SHEET / CUTOUT 3.500 × 1.250

FW-2210 / REV C / FORMED / PHOTOGRAPHED

Chassis enclosure

12.00 × 8.00 × 4.00 IN / 2 MATERIALS

FROM $66.56 AT 250 / 11 DAYS
19.0014.003.47FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE17.00 × 3.47 × 14.00 IN (2U) / 19 IN EARS / 0.063 SHEET

FW-2216 / REV C / FORMED / PHOTOGRAPHED

Rack chassis, 2U

17.00 × 3.47 × 14.00 IN / 2 MATERIALS

FROM $89.93 AT 250 / 12 DAYS
12.0016.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 W × 16.00 H × 6.00 D IN / 0.075 WALL / HINGED DOOR

FW-2230 / REV C / WELDED / PHOTOGRAPHED

Wall-mount enclosure, hinged door

16.00 H × 12.00 W × 6.00 D IN / 2 MATERIALS

FROM $128.15 AT 250 / 15 DAYS

QUOTE DESK / MON TO FRI 07:00 TO 18:00 ET

Need FW-1046 changed? Send the revision.

A different hole, flange, thickness or finish is a drawing change, not a new part. Mark what moved and the estimator prices the difference.

Quote a variationCall the quote desk, 631 555 0148

DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY

Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Main pages
Details
Try it
Behind the counter
Small print
Back to Sumo Studios

[] previous / next demo