03.5FW-2216 / REV C / FORMED / 3 PROCESSES

Rack chassis, 2U

A 2U chassis for a 19 in rack: 17.00 in wide, 3.47 in tall, 14.00 in deep, with front ears and pressed nuts for the cover screws.

FW-2216 Rack chassis, 2U: slide from the drawing to the photograph

Material / $ per lb

5052 AL$2.65 / LB1018$1.30 / LB

Finish / adder per part

Black Powder+$4.50Zinc+$2.75 / Zinc plating is for carbon steel.Clear Anodize+$3.90

Finishes follow the selected material. Disabled options are not offered for this part.

Quantity / discount

1 PC× 1.0010 PCS× 0.8250 PCS× 0.66250 PCS× 0.52

Other quantity

COMPUTED QUOTE / USD / FOB HAUPPAUGE

UNIT WEIGHT3.625 LB

UNIT PRICE$124.92

LOT TOTAL$6,246.00

LEAD TIME10 BUSINESS DAYS

Price breaks for FW-2216.

5052-H32 / CLEAR ANODIZE / THE ROW IN BLUE IS YOUR LOT SIZE

QUANTITY	UNIT	BILLABLE LOT	LEAD
1 PC	$173.20	$173.20	7 DAYS
10 PCS	$147.64	$1,476.40	8 DAYS
50 PCS / YOURS	$124.92	$6,246.00	10 DAYS
250 PCS	$105.04	$26,260.00	14 DAYS

DRAWING REQUIREMENTS

FW-2216 / REV C / THIRD ANGLE

Overall	17.00 × 3.47 × 14.00 IN
Stock	0.063 IN
Tolerance	±0.010 IN CUT / ±0.015 IN PER BEND / ±0.5°
Materials	5052-H32 / 1018 CRS
Finishes	Clear Anodize / Black Powder / Zinc
Packaging	One chassis per carton, cover taped inside, foam corners.
Drawing	FW-2216 REV C / 1 SHEET

NOTES FROM THE FLOOR

01
3.47 in is 1/32 in under two rack units, so stacked chassis clear each other.
02
Cover nuts are pressed after forming and before finish.
03
Powder is masked off the ground points; mark them on the print.