FERROWRIGHTSend RFQQUOTE IN 1 DAY

FERROWRIGHT FABRICATION / HAUPPAUGE, NY

  1. 01Home
  2. 02Capabilities
  3. 03Parts catalogYOU ARE HERE
  4. 04Industries
  5. 05Quality
  6. 06The shop
  7. 07Equipment
  8. 08Design guide
  9. 09Case studies
  10. 10Bracket configurator
  11. 11Request a quote
  12. 12Careers
  13. 13Questions buyers ask
  14. 14Contact and visit
  15. 15Customer login

QUOTE DESK / 631 555 0148 / MON TO FRI 07:00 TO 18:00 ET
180 KERF COURT / HAUPPAUGE, NY 11788

03.12FW-0430 / REV C / MACHINED / 1 PROCESS

Two-piece shaft collar, 1 in bore

A split collar that clamps onto a 1.000 in shaft without marring it, 1.75 in across and 0.50 in wide.

FW-0430 two-piece stainless shaft collar on the bench, the split across its face and a socket head screw seated in each counterbore
  1. BORE Ø1.000 +0.002 / -0.000
  2. 303 / PASSIVATED
  3. 2 × #10 SHCS, COUNTERBORED

DRAWING REQUIREMENTS

FW-0430, as drawn.

Ø1.750.50FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLEOD 1.75 / BORE Ø1.000 / 0.50 WIDE / TWO-PIECE
FW-0430 / REV C / THIRD ANGLE
OverallOD 1.75 IN / WIDTH 0.50 IN / BORE Ø1.000 IN
StockBAR STOCK
ToleranceBORE Ø1.000 +0.002 / -0.000 IN / ±0.005 IN
Materials303 bar / 316L 2B (on order, +3 days)
FinishesPassivate
PackagingHalves bagged as numbered pairs, screws in the same bag.
DrawingFW-0430 REV C / 1 SHEET

NOTES FROM THE FLOOR

Before FW-0430 runs.

  1. 01

    Both halves are machined as one ring, then cut, so they always match.

  2. 02

    Halves ship as numbered pairs; keep them together.

  3. 03

    316 is on order; add 3 business days.

Made on, used in.

Specify alongside FW-0430.

FW-1042 L-bracket 90. Leg A 4.00, leg B 3.00, width 2.00, thickness 0.125 inches. 2 holes.FW / DIMENSIONS IN INCHESA 4.00 INB 3.00 INT 0.125 INSIDE / THICKNESS ENLARGEDBENDW 2.00 INFLAT 6.875 INLEG ALEG B2 × Ø0.257 / SCALE NTS

FW-1042 / REV C / FORMED / PHOTOGRAPHED

L-bracket 90

4.00 × 3.00 × 2.00 IN / 3 MATERIALS

CONFIGURABLE / $11.31 AT 250 / 10 DAYS
1.501.501.50FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLEFLANGES 1.50 / 1.50 / OFFSET 1.00 / 1.50 WIDE / 0.090 SHEET

FW-1046 / REV C / FORMED / PHOTOGRAPHED

Z-bracket, 1.00 in offset

3.00 × 1.00 × 1.50 IN / 2 MATERIALS

FROM $7.38 AT 250 / 10 DAYS
6.003.006.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLELEG A 6.00 / LEG B 6.00 / 3.00 WIDE / 3.00 GUSSET / 0.188 PLATE

FW-1050 / REV C / WELDED / PHOTOGRAPHED

Gusseted angle bracket

6.00 × 6.00 × 3.00 IN / 2 MATERIALS

FROM $16.99 AT 250 / 12 DAYS
12.008.004.00FW / DIMENSIONS IN INCHESSCALE NTS / THIRD ANGLE12.00 × 8.00 × 4.00 IN / 0.063 SHEET / CUTOUT 3.500 × 1.250

FW-2210 / REV C / FORMED / PHOTOGRAPHED

Chassis enclosure

12.00 × 8.00 × 4.00 IN / 2 MATERIALS

FROM $66.56 AT 250 / 11 DAYS

QUOTE DESK / MON TO FRI 07:00 TO 18:00 ET

Need FW-0430 changed? Send the revision.

A different hole, flange, thickness or finish is a drawing change, not a new part. Mark what moved and the estimator prices the difference.

Quote a variationCall the quote desk, 631 555 0148

DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY

Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Main pages
Details
Try it
Behind the counter
Small print
Back to Sumo Studios

[] previous / next demo