03.11FW-0422 / REV C / MACHINED / 1 PROCESS

Bearing block

A machined block that carries a 1.000 in shaft, with the bore held to plus one thousandth, minus nothing.

FW-0422 Bearing block: slide from the drawing to the photograph

Material / $ per lb

6061 AL$2.95 / LB303 SS$4.10 / LB

Finish / adder per part

Clear Anodize+$3.90Passivate+$2.10 / Passivation is for stainless.

Finishes follow the selected material. Disabled options are not offered for this part.

Quantity / discount

1 PC× 1.0010 PCS× 0.8250 PCS× 0.66250 PCS× 0.52

Other quantity

COMPUTED QUOTE / USD / FOB HAUPPAUGE

UNIT WEIGHT0.713 LB

UNIT PRICE$40.97

LOT TOTAL$2,048.50

LEAD TIME10 BUSINESS DAYS

Price breaks for FW-0422.

6061-T6 / CLEAR ANODIZE / THE ROW IN BLUE IS YOUR LOT SIZE

QUANTITY	UNIT	BILLABLE LOT	LEAD
1 PC	$60.06	$150.00 / LINE MIN	7 DAYS
10 PCS	$49.95	$499.50	8 DAYS
50 PCS / YOURS	$40.97	$2,048.50	10 DAYS
250 PCS	$33.10	$8,275.00	14 DAYS

DRAWING REQUIREMENTS

FW-0422 / REV C / THIRD ANGLE

Overall	3.00 × 2.00 × 1.50 IN / BORE Ø1.000 +0.001 / -0.000 IN
Stock	BAR STOCK
Tolerance	BORE Ø1.000 +0.001 / -0.000 IN / ±0.005 IN ELSEWHERE
Materials	6061-T6 / 303 bar
Finishes	Clear Anodize / Passivate
Packaging	Each block in its own bag, bore plugged, inspection report in the box.
Drawing	FW-0422 REV C / 1 SHEET

NOTES FROM THE FLOOR

01
The bore is finished in the same setup as the mounting face, so the two stay square.
02
Every block is checked with a bore gauge and the reading goes on the inspection report.
03
Anodize builds about 0.0004 in; the bore is machined to allow for it.