03.10FW-0417 / REV C / MACHINED / 2 PROCESSES

Pipe flange, 6 in OD

A flat flange 6.00 in across, cut from 0.750 in plate, with four 0.750 in bolt holes on a 4.75 in circle and a machined center bore.

FW-0417 Pipe flange, 6 in OD: slide from the drawing to the photograph

Material / $ per lb

304 SS$3.40 / LBA36$1.15 / LB

Finish / adder per part

Zinc+$2.75Passivate+$2.10 / Passivation is for stainless.

Finishes follow the selected material. Disabled options are not offered for this part.

Quantity / discount

1 PC× 1.0010 PCS× 0.8250 PCS× 0.66250 PCS× 0.52

Other quantity

COMPUTED QUOTE / USD / FOB HAUPPAUGE

UNIT WEIGHT4.977 LB

UNIT PRICE$40.45

LOT TOTAL$2,022.50

LEAD TIME8 BUSINESS DAYS

Price breaks for FW-0417.

A36 HRPO / ZINC / THE ROW IN BLUE IS YOUR LOT SIZE

QUANTITY	UNIT	BILLABLE LOT	LEAD
1 PC	$59.17	$150.00 / LINE MIN	5 DAYS
10 PCS	$49.26	$492.60	6 DAYS
50 PCS / YOURS	$40.45	$2,022.50	8 DAYS
250 PCS	$32.75	$8,187.50	12 DAYS

DRAWING REQUIREMENTS

FW-0417 / REV C / THIRD ANGLE

Overall	OD 6.00 / BC 4.75 / 4 × Ø0.750 IN
Stock	0.750 IN PLATE
Tolerance	±0.005 IN BORE AND BOLT CIRCLE / FACE FLAT TO 0.002 IN
Materials	A36 HRPO / 304 2B
Finishes	Zinc / Passivate
Packaging	Each flange bagged with a cap over the sealing face, 6 per box.
Drawing	FW-0417 REV C / 1 SHEET

NOTES FROM THE FLOOR

01
The blank is laser cut, then faced and bored on the lathe so the sealing face is flat.
02
Bolt holes are checked with a pin gauge.
03
Zinc plating goes to a partner finisher and adds 1 business day.