03.9FW-3320 / REV C / CUT / 2 PROCESSES

Control subplate

A flat back plate for a control cabinet, 20.00 by 16.00 in, drilled and tapped for rail and components.

FW-3320 Control subplate: slide from the drawing to the photograph

4 × Ø0.257 THRU
FLAT 0.030 OVER THE PLATE

Material / $ per lb

5052 AL$2.65 / LBA36$1.15 / LB

Finish / adder per part

Mill+$0.00Zinc+$2.75 / Zinc plating is for carbon steel.

Finishes follow the selected material. Disabled options are not offered for this part.

Quantity / discount

1 PC× 1.0010 PCS× 0.8250 PCS× 0.66250 PCS× 0.52

Other quantity

COMPUTED QUOTE / USD / FOB HAUPPAUGE

UNIT WEIGHT3.917 LB

UNIT PRICE$38.28

LOT TOTAL$1,914.00

LEAD TIME7 BUSINESS DAYS

Price breaks for FW-3320.

5052-H32 / MILL / THE ROW IN BLUE IS YOUR LOT SIZE

QUANTITY	UNIT	BILLABLE LOT	LEAD
1 PC	$58.00	$150.00 / LINE MIN	4 DAYS
10 PCS	$47.56	$475.60	5 DAYS
50 PCS / YOURS	$38.28	$1,914.00	7 DAYS
250 PCS	$30.16	$7,540.00	11 DAYS

DRAWING REQUIREMENTS

FW-3320, as drawn.

FW-3320 / REV C / THIRD ANGLE

Overall	20.00 × 16.00 IN
Stock	0.125 IN
Tolerance	±0.010 IN CUT / 0.030 IN FLATNESS
Materials	5052-H32 / A36 HRPO
Finishes	Mill / Zinc
Packaging	Shipped flat on a skid, cardboard over the tapped face.
Drawing	FW-3320 REV C / 1 SHEET

NOTES FROM THE FLOOR

Before FW-3320 runs.

01
Hole patterns come straight from your panel layout; send the DXF.
02
Threads in aluminum are formed, not cut, for stronger holes.
03
Flatness after cutting is 0.030 in over the plate.

Made on, used in.

Laser cutting Hardware and assembly

Electronics General industrial

Specify alongside FW-3320.

FW-3305 / REV C / CUT / PHOTOGRAPHED

Filler panel, 1U

19.00 × 1.72 IN / 1 MATERIAL

FROM $10.40 AT 250 / 13 DAYS

FW-0417 / REV C / MACHINED / PHOTOGRAPHED

Pipe flange, 6 in OD

OD 6.00 / BC 4.75 / 4 × Ø0.750 IN / 2 MATERIALS

FROM $32.75 AT 250 / 12 DAYS

FW-0422 / REV C / MACHINED / PHOTOGRAPHED

Bearing block

3.00 × 2.00 × 1.50 IN / BORE Ø1.000 +0.001 / -0.000 IN / 2 MATERIALS

FROM $33.10 AT 250 / 14 DAYS

FW-0430 / REV C / MACHINED / PHOTOGRAPHED

Two-piece shaft collar, 1 in bore

OD 1.75 IN / WIDTH 0.50 IN / BORE Ø1.000 IN / 2 MATERIALS

FROM $17.64 AT 250 / 13 DAYS

QUOTE DESK / MON TO FRI 07:00 TO 18:00 ET

Need FW-3320 changed? Send the revision.

A different hole, flange, thickness or finish is a drawing change, not a new part. Mark what moved and the estimator prices the difference.

Quote a variation Call the quote desk, 631 555 0148

DRAWING IN BY 15:00 ET / A PRICED QUOTE THE NEXT BUSINESS DAY

Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios

Start

Home

Main pages

Details

Parts18

Try it

Behind the counter

Small print