Sample account: Dana Whitlock, RonkonkomaExit
FWJ-26-0311 Chassis enclosure
The stage history and documents attached to this job.
Ferrowright Fabrication64 pages / Fictional brand / Demo site by Sumo Studios
Start
Details
Behind the counter
Chassis enclosure / FW-2210
50 PCS / SHIP WED OCT 21 / $111.48 UNIT
cut
done
done
form
done
done
machine
Not on this job
Not on this job
hardware
done
done
finish
active
active
inspect
queued
queued
ship
queued
queued
Stage by stage.
PO 4471-18 / REV C / 50 ORDERED / 51 GOOD / 0 SCRAP
LOT 2291 / 5052-H32 0.063 / HEAT REF ON CERT
RELEASED Wed Oct 7 / SHIP Wed Oct 21
FINISH BATCH P-0930 / PENDING CURE
FAIR ON FIRST PIECE / FINAL SAMPLE 8 OF 50
cut
Thu Oct 8 / 06:40 ET / FW-M02
51 cut: 50 + 1 setup piece. Nest 0311-A.
form
Mon Oct 12 / 15:10 ET / FW-M03
First piece measured 12 of 12 in tolerance. FAIR-2210-C attached.
machine
No operation
Not on this job.
hardware
Wed Oct 14 / 09:05 ET / FW-M13
Four 10-32 nuts pressed on all 51, before finish.
finish
Fri Oct 16 / 13:30 ET / FW-M15
In the booth. Cure 20 min at 400 °F, second shift.
inspect
Mon Oct 19
Final: sample of 8 per the plan for lots of 9 to 50. Nut threads GO / NO-GO; coating thickness from P-0930.
ship
Wed Oct 21
Our truck, route 3, Ronkonkoma.
Mon Oct 12 / 15:22 ET
First article measured: 12 of 12 characteristics in tolerance. Report attached. Lot released to run.
Wed Oct 14 / 09:05 ET
Nuts pressed on all 51. Powder is booked for second shift on the ship-date-minus-3 slot.
Documents attached to this lot
Coating record P-0930 / PENDING CURE
Notes on the traveler
First article: 12 of 12 characteristics in tolerance. Nuts pressed on all 51 parts. Final sample: 8 of 50.